A Dutch gable roof mixes a hip roof with a small gable at the top, and that little gable, the gablet, is where most leaks begin. Finding out how to fix Dutch gable roof leaks means checking the flashing where the gablet sits on the slope, its short verge and its face, then the hips below.
This guide explains what a Dutch gable roof is, the faults that affect it most, the tools you need and each repair step in plain English. If water is already coming through a ceiling, read our guide on how to fix a leaking roof from the inside first, then come back here for the outside repair.
What is a Dutch gable roof?
A Dutch gable roof, also called a gablet roof, is a hip roof with a small gable at the top of one or more hips. The gable is usually clad, tile-hung or fitted with a vent or small window.
Where do Dutch gable roofs leak?
| Area | Fault | Sign |
|---|---|---|
| Gablet base | Missing or split apron flashing | Damp just below the ridge |
| Gablet verge | Loose verge tiles or mortar | Tiles slipping at the top |
| Gablet face | Split cladding or failed vent | Damp in the loft at the top of the hip |
| Hips below | Loose hip tiles | Damp in the corners |
| Gablet ridge | Cracked ridge mortar | Rocking ridge tiles |

How do you fix the gablet apron flashing?
- Remove the tiles directly below the base of the gablet.
- Check the lead apron that runs along the bottom of the gablet face.
- Replace split lead with new Code 4 lead, tucked under the cladding and dressed over the tiles below.
- Fix with lead clips so wind cannot lift it.
- Refit the tiles.
How do you fix the small verge on a Dutch gable?
The gablet verge is short but exposed. Remove cracked mortar, make sure the verge tiles are nailed or clipped, and fit a small dry verge kit or fresh mortar over an undercloak. Finish at the ridge with an end cap.
How do you repair the gablet face?
Check the cladding, tile-hanging or vent on the triangle of the gablet. Replace split boards or slipped tiles, and reseal around any vent or window. Paint or treat timber cladding so it does not rot.
How do you fix the hips on a Dutch gable roof?
Below each gablet, the hips run down to the eaves. Lift loose hip tiles, clear old mortar, fit a dry hip roll and fix each hip tile back mechanically. Check the hip iron at the bottom.
How can you prevent Dutch gable roof leaks?
- Check the gablet aprons and verges once a year.
- Keep any gablet vents free of nests and debris.
- Repaint timber cladding every few years.
- Replace failed mortar with dry-fix systems.
Can you fix a Dutch gable roof yourself?
The gablet sits at the highest point of the roof, so access needs a scaffold. Lead work also needs care to dress correctly. For high-level work, use a trained roofer.
Conclusion: How to Fix Dutch Gable Roof Leaks the Right Way
To fix a Dutch gable roof, look closely at the small gable (gablet) at the top of each hip. Leaks usually come from the joint where the gablet wall sits on the hip slope, its small verge, or its cladding. Re-flash that joint, fix the verge tiles and repair the hips below.
Key points to remember:
- A Dutch gable is a hip roof with a mini gable at the top of the hip.
- The gablet sits on the roof slope, so it needs a flashing or apron where they meet.
- The small verge on the gablet needs fixing just like a full gable.
- The hips below are repaired in the same way as a hip roof.
Now you know how to fix Dutch gable roof leaks in the right order. Work in dry, calm weather, follow the HSE’s advice on working at height, and stop if the timbers feel soft or the job is out of safe reach. For what to do while water is still coming in, see our main guide on how to fix a leaking roof from the inside.
Previous guide: How to fix a butterfly roof · Next guide: How to fix a pyramid roof
Dutch gable roof repair FAQs
What is a gablet?
A gablet is the small triangular gable at the top of a hip on a Dutch gable roof.
Why is there damp just under my ridge?
On a Dutch gable roof, this often points to a failed apron flashing at the base of the gablet.
Do gablet vents cause leaks?
They can if the vent cracks or the seal around it fails. Driven rain then gets straight into the loft.
More Roof Repair Guides by Roof Type
- How to fix a gable roof: verges, ridge and bargeboards
- How to fix a hip roof: hip tiles, hip irons and cut tiles
- How to fix a flat roof: felt, EPDM and GRP patches
- How to fix a mansard roof: the kerb, slates and dormers
- How to fix a gambrel roof: the break line and sagging
- How to fix a shed roof: patching and re-felting
- How to fix a butterfly roof: the central valley gutter
- How to fix a pyramid roof: the apex, finial and hips
- How to fix a skillion roof: abutment flashing and pitch
- How to fix a dormer roof: lead soakers, apron and window seals
- How to fix a saltbox roof: the long slope, gutter and ridge
- How to fix a bonnet roof: the change of pitch and sprockets
- How to fix an M-shaped roof: the central valley and twin ridges
- How to fix a clerestory roof: window seals and abutments
Phillip Holland is the founder of Experienced Roofers Ltd, bringing 30 years of roofing and construction expertise to homeowners across Wiltshire. A certified roofer who has overseen hundreds of projects, Phillip writes to demystify roofing problems, covering everything from spotting early leak damage to choosing the right roofing material and knowing when it’s time to call a professional.