Lead flashing, valleys, bay roofs and dormer cheeks for homes across Whitchurch and Bristol. Weatherproof joints that last, with a fixed written quote.
Most roof leaks start where the roof meets something else: a chimney, a wall, a dormer or a valley. Lead seals those joints. When it splits, lifts or is patched with tape, water gets in. Our lead work in Whitchurch replaces failed lead with new code-correct sheet, properly dressed and fixed.
Experienced Roofers Ltd carries out lead work across Whitchurch and the surrounding areas, from a single chimney flashing to full bay roofs.




Lead work is the use of sheet lead to waterproof the joints where a roof meets another surface, such as a chimney, a wall, a dormer or a valley between two roof slopes. Lead is used because it is durable and easy to shape around awkward details. Properly fitted, it can last 50 years or more.
Stepped flashings, front aprons and back gutters around chimney stacks, chased into the mortar joints and pointed in.
New lead-lined valleys where two roof slopes meet, one of the most common leak points on older roofs.
Lead flashing where a roof meets a wall, such as on extensions, porches and lean-to roofs.
Fully leaded bay roofs and canopies, a common feature on Victorian and Edwardian homes in Knowle and Brislington.
Lead cladding and weathering on dormer windows.
Water coming in around the stack? Read our step-by-step guide on how to fix a chimney leak.
Guide prices for Whitchurch and Bristol in 2026, including VAT. Scaffolding is extra where needed.
| Job | Typical cost |
|---|---|
| Small flashing repair | £150 – £400 |
| Chimney flashing replacement | £550 – £1,100 |
| Lead valley replacement | £800 – £1,800 |
| Leaded bay roof | £900 – £2,000 |
For chimney flashing, repointing and rebuild prices in full, see our chimney repair cost guide.
| Material | Lifespan | Notes | Best for |
|---|---|---|---|
| Lead sheet | 50+ years | Heavier, scrap value to thieves | Most chimneys, valleys and bays |
| Lead-free flashing | 20 – 30 years | Light, no scrap value | Low-risk areas and theft hot spots |
Most homes in Whitchurch have at least one chimney or wall abutment, and the original lead on many of them is now well past its best. Older terraces nearby often have leaded bays and valleys too. We follow Lead Sheet Association guidance on lead sizes and fixings, so the new lead moves with the weather without cracking.
We also carry out lead work across south and east Bristol: roofers in Bristol, roofers in Knowle, roofers in Hanham, roofers in Hengrove, roofers in Stockwood, roofers in Kingswood, roofers in Brislington.
Getting several quotes is sensible, but price is only one part of it. Before you book, check that the company:
We are happy to answer every one of these before you commit.
Lead work is a skilled trade, and bad lead work is one of the main causes of roof leaks we are called to fix. We use the right code of lead, keep pieces to the correct size and fix them properly, so the job lasts for decades rather than a couple of winters.
A local team that responds quickly and keeps you updated from first enquiry to finished job.
Clear communication, honest advice and a personal service that treats every concern, big or small, with the attention it deserves.
Quality materials and careful dressing, chosen to suit your roof and built to last.
Committed to doing the job right the first time, so you get lasting protection and genuine value from every project.
Serving Whitchurch & Surrounding Areas
Common questions about lead work in Whitchurch and Bristol.
Properly fitted lead flashing can last 50 years or more. Most early failures are caused by pieces that are too long or poorly fixed.
Replacing the lead flashing on a typical chimney usually costs £550 to £1,100, plus scaffolding if it is needed.
Yes. Lead-free flashing products are lighter and have no scrap value to thieves. We will advise if one suits your roof.
The most common causes are failed flashing, cracked mortar and a damaged crown or cap. We check all of them in one visit.
Small lifts can be refixed and repointed. Split, thin or taped lead should be replaced.
For most chimneys and high roofs, yes. For low porches and bays, we can often work from ladders or a tower.