Clerestory roofs pull daylight deep into a room through a band of high windows, but those windows sit right where two roof levels meet. If you are trying to work out how to fix clerestory roof leaks, check three places in order: the window seals, the upper roof edge and the lower roof abutment.
This guide explains what a clerestory roof is, the faults that affect it most, the tools you need and each repair step in plain English. If water is already coming through a ceiling, read our guide on how to fix a leaking roof from the inside first, then come back here for the outside repair.
What is a clerestory roof?
A clerestory roof is a roof with two levels, where a vertical wall with a row of windows rises between them to let light deep into the room. It is common in modern extensions, churches and barn conversions.
Where does a clerestory roof leak?
| Area | Fault | Sign |
|---|---|---|
| Clerestory window frames | Cracked sealant, failed gaskets | Drips at the bottom of the window |
| Lower roof abutment | Missing or lifted flashing | Damp on the wall below the windows |
| Upper roof edge | Blocked gutter or short drip | Water running down the glass and into frames |
| Window sills | Sill sloping inwards or cracked | Water pooling on the sill |
| Glass | Condensation | Water on the inside of the glass in cold weather |

How do you fix clerestory window seals?
- Clean the frame and check the sealant around the outside edge.
- Cut out old, cracked sealant.
- Clean and dry the joint fully.
- Apply new exterior-grade sealant along the frame-to-wall joint.
- Check the window drainage holes and clear them.
How do you fix the lower roof abutment?
Where the lower roof meets the clerestory wall, there should be a flashing that turns up the wall under the window sill and laps over the lower roof covering. Re-fix or replace any lifted or split flashing, and make sure the upstand is at least 150 mm high on flat roofs so water cannot back up into the window.
How do you fix the upper roof edge?
The upper roof should throw water clear of the windows. Clear its gutter, check the drip edge projects past the wall, and fix any overflow that runs down the glass.
How do you stop condensation on clerestory windows?
Warm air rises and meets the cold glass at the top of the room. Improve ventilation with trickle vents or opening windows, keep the room heated evenly, and consider upgrading to better-insulated glazing.
How do you maintain a clerestory roof?
- Clear both roof gutters twice a year.
- Check window seals every year.
- Inspect the lower roof abutment after heavy rain.
- Keep window drainage slots open.
When should a professional fix a clerestory roof?
The window band is usually high and over a lower roof, so access is difficult. If the frames are failing or the flashing detail is wrong, a roofer and glazier may both be needed.
Conclusion: How to Fix Clerestory Roof Leaks the Right Way
To fix a clerestory roof, check the band of windows that sits between the higher and lower roof. Leaks usually come from three places: the window seals, the flashing where the upper roof overhangs the windows, and the abutment where the lower roof meets the window wall. Fix whichever one is failing.
Key points to remember:
- A clerestory roof has a row of high windows in the wall between two roof levels.
- The lower roof abutment under the windows is a common leak point.
- Window frame seals often fail before the roof itself.
- Condensation on the glass can look like a leak.
Now you know how to fix clerestory roof leaks in the right order. Work in dry, calm weather, follow the HSE’s advice on working at height, and stop if the timbers feel soft or the job is out of safe reach. For what to do while water is still coming in, see our main guide on how to fix a leaking roof from the inside.
Previous guide: How to fix an M-shaped roof · Next guide: How to fix a leaking roof from the inside
Clerestory roof repair FAQs
Why does water appear under my clerestory windows?
It is usually a failed flashing at the lower roof abutment or a failed window seal.
Is it a leak or condensation?
If water appears on cold mornings even when it has not rained, condensation is the likely cause.
How high should the upstand be under a clerestory window?
On a flat lower roof, a 150 mm upstand is the usual minimum so water cannot reach the window.
More Roof Repair Guides by Roof Type
- How to fix a gable roof: verges, ridge and bargeboards
- How to fix a hip roof: hip tiles, hip irons and cut tiles
- How to fix a flat roof: felt, EPDM and GRP patches
- How to fix a mansard roof: the kerb, slates and dormers
- How to fix a gambrel roof: the break line and sagging
- How to fix a shed roof: patching and re-felting
- How to fix a butterfly roof: the central valley gutter
- How to fix a Dutch gable roof: the gablet, verge and hips
- How to fix a pyramid roof: the apex, finial and hips
- How to fix a skillion roof: abutment flashing and pitch
- How to fix a dormer roof: lead soakers, apron and window seals
- How to fix a saltbox roof: the long slope, gutter and ridge
- How to fix a bonnet roof: the change of pitch and sprockets
- How to fix an M-shaped roof: the central valley and twin ridges
Phillip Holland is the founder of Experienced Roofers Ltd, bringing 30 years of roofing and construction expertise to homeowners across Wiltshire. A certified roofer who has overseen hundreds of projects, Phillip writes to demystify roofing problems, covering everything from spotting early leak damage to choosing the right roofing material and knowing when it’s time to call a professional.