
Quick answer: Here is how to repoint brickwork. Rake out the old mortar to about 15 to 20 mm deep, brush out the dust and dampen the joints. Press new mortar in firmly from the top of the wall down, then finish the joints to match. Brick repointing works best in dry weather between 5°C and 25°C, with lime mortar on older homes.
Key Takeaways
- Rake joints to about twice their height, usually 15 to 20 mm deep.
- Use lime mortar on older, soft brick or stone. Never use hard cement on them.
- Work from the top down in dry, mild weather.
- Protect fresh mortar from rain, frost and strong sun while it cures.
Repointing replaces worn mortar between bricks. It keeps water out of your walls, prevents damp and keeps your home looking neat. When mortar crumbles, gaps let rain soak into the brickwork.
We are Experienced Roofers Ltd, and we carry out repointing in Whitchurch and across the surrounding areas of Bristol. This guide shows you how to repoint brickwork step by step, which mortar to choose and when the job is best left to a professional.
What is repointing? It is the process of raking out old, failing mortar from between the bricks and replacing it with fresh mortar. It keeps water out of the wall and holds the brickwork together.
What Tools Do You Need to Repoint Brickwork?
You need a plugging chisel or raking tool, a club hammer, a pointing trowel, a hawk, a jointing tool, a stiff brush, buckets and a water spray. Add safety glasses, gloves and a dust mask.
- Plugging chisel or joint raker and club hammer
- Pointing trowel and hawk (mortar board)
- Jointing tool to finish the joints
- Stiff and soft brushes
- Buckets and a water spray bottle
- Mortar mix: lime or cement-based, depending on your wall
- Safety glasses, gloves and dust mask
Which Mortar Should You Use?
Use lime mortar for older homes with soft brick or stone, including most Victorian terraces and Pennant stone houses in Bristol. Use a cement-based mix only on modern, hard brick. The mortar should always be softer than the brick, so the joint takes the strain rather than the brick.
Learn more about lime and cement costs in our guide to repointing costs in Bristol.
How to Repoint Brickwork Step by Step
There are eight steps: prepare the area, rake out old mortar, clean the joints, dampen them, mix the mortar, fill the joints from the top down, finish the joints and clean up. Take extra care around doors and windows.
Step 1: Prepare the wall
Plan the work for a dry spell between about 5°C and 25°C, with no frost forecast for a few days if you are using lime. Clear plants and furniture away from the wall, and protect windows, doors and paving with dust sheets. Above ground floor level, use a properly set-up scaffold tower rather than a ladder, because you need both hands free. Wear eye protection and a dust mask, and have a bucket of water and a sponge ready for splashes.
Step 2: Rake out the old mortar
Remove loose and crumbling mortar with a plugging chisel and club hammer, or a raking tool, to a depth of about 15 to 20 mm. That is roughly twice the height of the joint. Cut out the vertical joints first, then the horizontal ones. Keep the chisel in the centre of the joint so you do not chip the brick edges, which makes the finished joint look wide and untidy. An angle grinder is quicker, but it is easy to damage soft bricks with one, so use it with great care or leave it to a professional.
Step 3: Clean the joints
Brush out every joint thoroughly with a stiff brush, working from the top down. Follow up with a hand sprayer or a hose on a gentle setting to wash out fine dust. Even a thin layer of dust stops the new mortar bonding properly, and that is one of the main reasons repointing fails early. Check each joint is clean back to sound mortar before you move on.
Step 4: Dampen the joints
Lightly mist the joints and brick edges with water just before you point each area. Dry bricks pull moisture out of fresh mortar too quickly, which leaves it weak and powdery. The surface should be damp, not dripping. On hot or windy days, you may need to mist again as you go.
Step 5: Mix the mortar
Match the mortar to the wall. Older, soft-brick homes need lime mortar, often a 1:2.5 or 1:3 mix of natural hydraulic lime to sharp sand. Modern brick can take a 1:1:6 cement, lime and sand mix. Add water slowly and mix to a firm, workable consistency that holds its shape on the trowel. Only mix what you can use in about an hour, and never re-wet mortar that has started to go off.
Step 6: Fill the joints from the top down
Start at the top of the wall and work down, so falling mortar does not mark finished work. Load mortar onto a hawk, then use a narrow pointing trowel to press it firmly into the joints. Do the vertical joints first, then the horizontal ones. Pack the mortar in hard so there are no air pockets. On deep joints, fill in two layers of about 10 mm, letting the first firm up before adding the second.
Step 7: Finish the joints
When the mortar is firm enough that your thumb leaves only a light print, finish the joints to match the rest of the house. Common finishes are flush, bucket handle and weathered. A jointing iron gives a neat bucket handle finish, and a stiff brush gives a natural lime finish. Finishing at the right time matters. Too early smears the brick, and too late leaves the joints rough and harder to weatherproof.
Step 8: Clean and protect
Once the mortar has stiffened, brush loose crumbs off the brick faces with a soft brush. Do not wipe with a wet cloth, which spreads mortar stains. Cover fresh work with damp hessian or sheeting to protect it from rain, frost and strong sun for at least a few days. Lime mortar needs gentle misting for several days while it cures. Repointing a wall properly can last 30 years or more.
What Are the Top Tips for Repointing?
- Work in mild, dry weather. Avoid frost and very hot days.
- Take your time to fill every joint fully.
- Match the mortar colour and joint style to the rest of the wall.
- Do a small test patch first to check the colour.
- Take extra care near doors, windows and soft brick edges.
- Check each section before moving on.
When Should You Call a Professional?
Call a professional for high walls, chimneys, gable ends, period homes needing lime work, or large areas. These need scaffolding, specialist skills and careful colour matching. Read our chimney stack repointing guide for chimney work.
Our City & Guilds qualified team repoints homes across Whitchurch, Bristol and the surrounding areas. See our repointing in Whitchurch service.
For independent guidance, see the Historic England guide to repointing brick and stone walls.
Frequently Asked Questions
How do I know if my bricks need repointing?
Look for crumbling, cracked or missing mortar, gaps between bricks, loose bricks and damp patches inside.
How much does it cost to repoint brickwork?
Professional repointing usually costs £40 to £70 per m². See our repointing cost guide for full prices.
How often do bricks need repointing?
Usually every 20 to 30 years, sooner on exposed walls or older homes.
Can I repoint a wall myself?
Yes, for small, low, easy-to-reach areas. Use the right mortar, take your time and work safely. Leave high walls and period homes to professionals.
Can you repoint over old mortar?
No. New mortar needs a clean, raked-out joint to bond. Pointing over old mortar soon cracks and falls out.
Would You Rather Have It Done Properly First Time?
Our team repoints walls, chimneys and whole houses with the right mortar for your bricks, and leaves the joints looking crisp. Call 0117 345 9991 or book a free survey. See our repointing in Whitchurch page and our roofers in Whitchurch.
Phillip Holland is the founder of Experienced Roofers Ltd, bringing 30 years of roofing and construction expertise to homeowners across Wiltshire. A certified roofer who has overseen hundreds of projects, Phillip writes to demystify roofing problems, covering everything from spotting early leak damage to choosing the right roofing material and knowing when it’s time to call a professional.